Mirka Abralon Discs - 150mm
Ref: ABRALON
Use Abralon for flexible sanding of both smooth and profiled surfaces. An exceptional, multifunctional patented sanding material.
To reduce the risk of pressure marks, Abralon creates a smooth sanding pattern on angled surfaces and edges. Recommended for use in the automotive, wood finishing and marine industries, the supple weave of Abralon allows water and air to pass freely, allowing this product suitable for both dry and wet sanding, either by machine or hand.
Abralon is also recommended for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP), lacquers, etc.
Please note:
Coarser grits are recommended for surface preparation of composite body parts and fine sanding of the body surfaces before primer and top lacquer applications.
Finer grits are suitable for smoothing of primers and bottom lacquers and the preparation of surfaces between blending. The sanding of pot marked surfaces and the preparation of the top coat prior to polishing.
Mirka has been a leading manufacturer and supplier of abrasives to the wood and furniture industry for over three decades, as well as the automotive industry. Specialising in coated, non-woven, dust-free sanding products for surface finishing.
Packs of 2
|
|
