Classic Hand Tools Limited - Lie-Nielsen Brass Backed Saws


	VAT REDUCTION TO 15% Please note that some displayed prices may still refer to vat at 17.5%. This is only a textual reference. ALL prices are automatically calculated at 15% at the check out

Secure Online Shopping

Online Catalogue > Shop by Manufacturer > Lie-Nielsen > Lie-Nielsen Brass Backed Saws

Lie Nielsen Dovetail Saw Ref: L-NDS

Beautiful curly maple handles with Swedish steel blades, modern technology applied to an early 19th Century design of saws from Sheffield, England.

Since dovetailing is a ripping operation, where the kerf is running with the grain, the Nielsen dovetail Saw has its teeth filed to a rip profile. With 15 points per inch, this Saw strikes an ideal balance between surface finish and speed. Teeth are set at .003" per side for a .026" kerf-narrow for straight cutting. Length, including handle, is 14", with an overall height of 4¼". Useable blade dimensions are 9" long by 1-5/8" deep (.020" thick).

Need to know how to use this saw correctly. Take a look at the Rob Cosman DVD "Mastering the Dovetail Saw" (see DVD section for more dovetailing instructional DVDs)

Quantity:

Lie Nielson Dovetail Saw Curly Maple - £93.85
Dovetail Saw Leather Case - £17.75
Rob Cosman DVD - Mastering the Dovetail Saw - £19.45

Lie Nielsen Carcass Saw Ref: L-NCS

The Carcass Saw is used for precise cuts across the grain, cutting tenon shoulders, and defining the edges of a dado. It has an open handle like the dovetail saw,14 points per inch, filed crosscut, for cutting quickly, yet accurately and smoothly.
The blade is .020" thick, with a .003" set. Overall length, including handle, is 16", with an overall height of 4-7/8".
The usable blade dimensions are 11" long by 2¼" deep. An ideal complement to the Dovetail Saw.

Also available are the:-
Rip Carcass Saw which is the same size as the Carcass Saw, but filed rip, 15ppi and
The Coarse Rip Carcass Saw, same size again, filed rip with 10 ppi. Both of these make nice tenon saws.

Quantity:

Lie Nielsen Standard Carcass Saw - £111.75
Lie Nielsen Rip Carcass Saw - £111.75
Lie Nielsen Coarse Rip Carcass Saw - £111.75
Lie Nielsen Carcass Saw leather case - £22.30

Lie Nielsen Small Crosscut Saw Ref: L-NSCX

Useful for crosscutting thin stock. Same size as the Dovetail Saw. Length, including handle, is 14", with an overall height of 4¼". Useable blade dimensions are 9" long by 1-5/8" deep. 16ppi.

Quantity:

Small Cross Cut Saw - £105.95
Small Cross Cut Saw Leather Case - £17.75

Lie-Nielsen Tenon Saw - Crosscut 300mm (12"blade) Ref: L-NTSX1

A Tenon Saw is a large backsaw used for making accurate deep cuts in furniture joinery. It should cut straight and fast, and the blade should not bind in the cut. For cutting tenons, which is with the grain, Lie Nielsen offer the 10 point rip tenon saws.
For cross grain work grain work such as tenon shoulders, housing dados and sliding dovetails, or precise cutoffs with a small mitre box we also offer the Lie Nielsen 13 point X-cut tenon saws.

These Tenon Saws are based on Disston models. Classic Curly Maple handles, stout 3/4" (1.90cm) x 1/4" (6.35mm) milled Brass back, Brass fittings, .032" (.81mm) thick Swedish Steel blade. Teeth are set at .004" (.10mm) per side. These saws are solid, well balanced and smooth cutting.

Tenon Saws come in two sizes. The 12" (30.48cm) Saw has a 12" blade with a 3" (7.62cm) depth of cut and is 17¼" (43.81cm) overall. The 14" (35.56cm) saw is a substantially bigger tool, with a 3-5/8" (9.20cm) depth of cut and 19¼" (48.89cm) overall.
Both lengths are available as a 10 point rip saw or 13 point crosscut saw.

Quantity:

Tenon Saw - X Cut 300mm (12" blade) - £133.95
Tenon Saw - X Cut 350mm (14" blade) - £142.95
Tenon Saw - Rip Cut 300mm (12" blade) - £125.95
Tenon Saw - Rip Cut 350mm (14" blade) - £133.95

Online Catalogue > Shop by Manufacturer > Lie-Nielsen > Lie-Nielsen Brass Backed Saws