Classic Hand Tools Limited


	VAT REDUCTION TO 15% Please note that some displayed prices may still refer to vat at 17.5%. This is only a textual reference. ALL prices are automatically calculated at 15% at the check out

Secure Online Shopping

Online Catalogue > Chisels & Mallets > Lie-Nielsen

Lie-Nielsen Bevel Edge Chisels Ref: L-NBE

Lie-Nielsen Chisels are based on the Stanley 750 Bevel Edge Socket Chisels. Socket chisels are not common these days, perhaps because they are expensive to make. At 9" long, these chisels are particularly comfortable in the hand and have excellent balance.

Made of A-2 Tool Steel, hardened to Rockwell 60-62, cryogenically treated and double tempered.

The edges are square, parallel along the length, and very narrow so you can get into tight places. The backs are ground flat and finished by hand at 400 grit. The bevel is flat ground at 30°, but a higher secondary bevel (about 35°) is advisable, depending on the wood and how the chisel is being used. Additional honing is recommended.

Lie-Nielsen Chisels have Maine-harvested Hornbeam handles standard.

There are now 10 sizes, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4" & 1" and these are all available individually.

The Chisels are available individually or in sets of 5 or 10.

Set of 5 - 1/8" (3mm), 1/4" (6mm), 3/8" (9.5mm), 1/2" (13mm) and 3/4" (19mm) with Lie Nielsen leather tool roll.

Full set of 10 with 12 piece unbranded quality leather tool roll.

There is always heavy demand for these chisels so please enquire as to stock levels. We have a rolling stock order so Classic Hand Tools try to have these chisels in stock at all time.

Prices include VAT

Quantity:

1/8" Code LNBE1 - £47.55
3/16" Code LNBE2 - £47.55
1/4" Code LNBE3 - £47.55
5/16" Code LNBE4 - £47.55
3/8" Code LNBE5 - £47.55
7/16" Code LNBE6 - £47.55
1/2" Code LNBE7 - £47.55
5/8" Code LNBE8 - £47.55
3/4" Code LNBE9 - £47.55
1" Code LNBE10 - £56.50
Set of 5 Hornbeam with Leather Tool Roll - £223.25
Set of 10 Hornbeam Without Roll - £432.00

Lie-Nielsen Long Handled Bevel Edge Chisels Ref: L-NBEP

The blades for these chisels are the same as for the standard bevel edge chisels. The handles are longer making the oveall length of the tool 325mm (or 12 3/4" in old money). This allows you to use the chisels for paring.

These chisels are supplied with hornbeam handles.

Prices include VAT

Quantity:

1/8" Code LNBEP1 - £44.50
3/16" Code LNBEP2 - £44.50
1/4" Code LNBEP3 - £44.50
5/16" Code LNBEP4 - £44.50
3/8" Code LNBEP5 - £44.50
7/16" Code LNBEP6 - £44.50
1/2" Code LNBEP7 - £44.50
5/8" Code LNBEP8 - £44.50
3/4" Code LNBEP9 - £44.50
1" Code LNBEP10 - £56.50
Full Set Code LNBEPSET (no tool roll) - £432.00

Lie-Nielsen Skew Chisels Ref: LNSK

The same as the Bevel Edge Socket Chisels but with a left and a right hand skew for jobs like cleaning out the corners of dovetail pins. Angle of skew 20°. Available in pairs 1/4, 3/8 and 1/2 inch.

Prices include VAT

Quantity:

LN skew pair 1/4" Hornbeam - £99.50
LN skew pair 3/8" Hornbeam - £99.50
LN skew pair 1/2" Hornbeam - £99.50
LN skew Set of 3 pairs - Hornbeam - £285.00

Lie-Nielsen Mortise Chisels Ref: L-NMC

Hornbeam handled socketed A2 cyrogenically treated mortise chisels from Lie-Nielsen Toolworks.The blades are formed taller than they are wide with parallel ground sides for accuracy in the cut.

- Overall length: 275mm(10 ¾")
- Blade length: 115mm(4 ½")

Available individually or as a five piece set supplied in a bespoke Lie-Nielsen leather tool roll.

Prices include VAT

>> Use and Care Instructions

Quantity:

3/16" Code LN MC1, £52.50
1/4" Code LN MC2, £52.50
5/16" Code LN MC3, £52.50
3/8" Code LN MC4, £52.50
1/2" Code LN MC5, £52.50
Set of 5 - LN MCSET - £262.50

Online Catalogue > Chisels & Mallets > Lie-Nielsen