Classic Hand Tools Limited - Rob Cosman DVDs


	VAT REDUCTION TO 15% Please note that some displayed prices may still refer to vat at 17.5%. This is only a textual reference. ALL prices are automatically calculated at 15% at the check out

Secure Online Shopping

Online Catalogue > Shop by Manufacturer > Rob Cosman DVDs

Rob Cosman/Chris Pye Woodcarving DVD - No. 1 - Sharpening Techniques Ref: RCDVDCP1

New from Rob Cosman and master woodcarver Chris Pye. Rob is the student as Chris teaches him the basics of how to get carving tools sharpened correctly. This is bench side instruction on how to make a gouge do more than you may have thought possible. Chris starts with a new tool and carfefully guides you through all the steps of preparation to finally achieve that desired cutting edge. You are guided through the maze of available chisels, Chris answers the how's and whys and suggests where to start when it comes to acquiring tools. Included in this dvd are a few of the practises Chris was taught during his apprenticeship that are not widely known. Chris Pye is an excellent teacher and Rob Cosman proves to be an attentive student.

1hr 52 min

Price: £23.93 (€27.76) (Including VAT at 15%)

Quantity:

Preview DVD - Broadband

Preview DVD - Dial Up

The Wood Hinge Box Ref: RCDVDPS1

The first of Rob Cosman's Project Series DVDs

The Wood-Hinge Box features:

- tips for accurate stock preparation.
- Rob's box making jigs
- jigs for making dowels
- Rob's dowel-drilling jigs
- shooting boards and planing jigs
- step by step construction of the wood hinge
- tips for proper assembly and gluing
- finishing options
- additional footage on building the jigs.

1 hour 45 minutes.

Rob uses his own design ¼ dowel centre drilling jig in the DVD, this should fit any 3/8” chuck and is ready to use.

Price: £23.93 (€27.76) (Including VAT at 15%)

Quantity:

1/4 Dowel Centre Jig Ref: COSJIG

As seen on "The Woodhinge Box" this is Rob's 1/4 dowel centre drilling jig.

Should fit any 3/8" chuck, ready to use.

Price: £22.95 (€26.62) (Including VAT at 15%)

Quantity:

Rob Cosman DVD Set of 8 Ref: RCDVDSET

ROB COSMAN COMPLETE DVD SET OF 8 DVDS

Over 9 hours of learning from the comfort of your armchair

- Mortise & Tenon
- The Alan Peters Approach
- Hand Cut Dovetails
- Advanced Hand-Cut Dovetails
- Hand Planing & Sharpening
- Rough to Ready
- Drawer Making
- Mastering the Dovetail Saw

RCDdvdset8

Price: £166.34 (€192.95) (Including VAT at 15%)

Quantity:

Mastering The Dovetail Saw DVD 8 Ref: RCDVD8

The New Rob Cosman DVD - Mastering The Dovetail Saw.

Benchside instruction on the proper use and care of your dovetail saws.

45 mins DVD8

Price: £19.53 (€22.65) (Including VAT at 15%)

Quantity:

Hand-Cut Mortise and Tenon DVD 7 Ref: RCDVD7

Bench-side instruction on hand cutting the mortise and tenons and through wedged tenon
additional instruction on sharpening tenon saws and mortise chisels.

Double DVD Set, 2 Hours 10 Minutes

Code RCDVD7

Price: £29.12 (€33.78) (Including VAT at 15%)

Quantity:

"The Alan Peters Approach" DVD 6 Ref: RCDVD6

In the shop with master craftsman Alan Peters, design and construction of fine furniture.

This DVD from Rob Cosman is a tribute to the extraordinary skills of British master craftsman Alan Peters. 53 Minutes Available now!

CODE RCDVD6

Price: £19.53 (€22.65) (Including VAT at 15%)

Quantity:

Drawer Making - The professional approach DVD 5 Ref: RCDVD5

DRAWER MAKING - TRIPLE LENGTH DVD

This is triple value as it is 2 1/4 hours long and takes through the techniques involved in making piston fit drawers.

CODE RCDVD5

Price: £29.12 (€33.78) (Including VAT at 15%)

Quantity:

Rough to Ready DVD 4 Ref: RCDVD4

Rough to Ready - instruction on how to square, flat & true timber from rough to smooth. 45 mins

CODE RCDVD4

Price: £19.53 (€22.65) (Including VAT at 15%)

Quantity:

Hand Planing & Sharpening DVD 3 Ref: RCDVD3

Hand Planing & Sharpening - how to sharpen and use hand planes. 45 mins

CODE RCDVD3

Price: £19.53 (€22.65) (Including VAT at 15%)

Quantity:

Advanced Hand-Cut Dovetails DVD 2 Ref: RCDVD2

Advanced Hand-Cut Dovetails - bench side instruction on hand-cutting hounds touth, half blind and mitred edge dovetails. 1 hour.

Code RCDVD2

Price: £22.46 (€26.05) (Including VAT at 15%)

Quantity:

Hand-Cut Dovetails DVD 1 Ref: RCDVD1

Hand-Cut Dovetails - bench side instruction on cutting "through dovetails" from tool selection to assembly, 45mins

Code RCDVD 1

Price: £19.53 (€22.65) (Including VAT at 15%)

Quantity:

Online Catalogue > Shop by Manufacturer > Rob Cosman DVDs