Classic Hand Tools

View Cart
   HomeShowsVisit UsAbout UsShippingLinksContact Us
Like us on FacebookFollow us on TwitterRead our Blog
 
 
 
     
   
     

    Secure Online Shopping
   
 

Secure Online Shopping

Chris Pye Signature Series


The first dedicated Slipstone Series designed by a Professional Master Woodcarver!

Chris Pye has been developing this range of dedicated slipstones with Norton Pike for over 3 years.

The slipstones are square and have different profiles on each of the 4 edges. These range from very flat to semicircular with two incremental curves in between. You will quickly see that the range of stones reduce in thickness from 3/4" (19mm) to 1/2" (12mm) to 1/4" (6mm)down to 1/8" (3mm). This covers all the requirements for sharpening large and narrow gouges.

There is a special stone for sharpening V tools, a 8 x 2" double sided fine coarse bench stone and an 8 x 2" arkansas bench stone to complete the series.

The bench stones both come with a small tin of Norton stone oil (4.5 fl oz) and are houses in a plastic holder.

The unique feature of these slipstones is that you can fit one of the 4 edges to exactly (or closely) match the sweep of your gouge to create an inside bevel or to remove any burr.
Chris Pye Signature Series Ref: CHT 647

The slipstones and benchstones from this Chris Pye Signature Series come well presented with clear written instructions.

 


Chris Pye Signature Series

Quantity:  


Chris Pye Signature Series
Chris Pye Sculpture Slipstone Set - 76 x 76 x 18mm - CHT 64728 £69.60
Chris Pye Standard Slipstone Set No.1 - 76 x 76 x 12mm - CHT64732 £66.12
Chris Pye Standard Slipstone Set No.2 - 76 x 76 x 6mm - CHT64730 £66.12
Chris Pye Detail Slipstone Set No.3 - 76 x 76 x 3mm - CHT64726 £59.16
Chris Pye Special V Stone - 64 x 64 x 10mm - CHT64727 £52.20
Chris Pye Bench oil stone fine/coarse 8x2" (200x50x25mm) with oil - CHT55188 £30.78
Ultra fine Arkansas Bench oil stone 8x2x3/4" (20x50x20mm) with oil - CHT54862 £116.58