Classic Hand Tools Limited - Veritas Saws and Saw Guides


	VAT REDUCTION TO 15% Please note that some displayed prices may still refer to vat at 17.5%. This is only a textual reference. ALL prices are automatically calculated at 15% at the check out

Secure Online Shopping

Online Catalogue > Shop by Manufacturer > Veritas > Veritas Saws and Saw Guides

Veritas Flush Cutting Saws Ref: VK3

Traditionally used for the rapid trimming of plugs and dowels flush with a surface, the Veritas flush-cutting saws can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only

The 22 tpi Japanese tooth-pattern blade cuts aggressively (on the pull stroke), but does not mark the surface that it is cutting next to. The thin blade is flexible and can be pressed flush to any surface, yet is rigid enough for good control.

The saw is available with teeth cut on only one edge or in a double-edged style that cuts from either side. Each is about 11-1/2" long with 4-3/4" of blade. These work like a charm.

Quantity:

Veritas Flush Cutting Saw Single Edge - £14.29
Veritas Flush Cutting Saw Double Edge - £16.69

Veritas Dovetail Saw and Guide Ref: VT0203

Hand-cut dovetails remain the mark of the skilled cabinetmaker and a feature that buyers look for in high-end furniture. Veritas has developed a guide and saw system that lets amateurs achieve professional results. The system also allows the seasoned expert to produce dovetail joints more quickly and with less effort.
The Veritas dovetail guides, which clamp in position, hold the saw at the correct place and the correct angle for a perfect cut. 3/4" rare-earth magnets embedded in the anodized aluminum guide and covered with a layer of low-friction UHMW plastic keep the saw perfectly aligned as you cut. You still have to chop out waste from the tails and pins, but the detailed instructions give you tips on how to do this quickly and accurately.

Clamping capacity of the guides covers material from 1/4" to 1" thick. They come in the traditional ratios of 1:6 and 1:8, for softwood and hardwood respectively; however, as a result of modern glues, there is nothing stopping you from using either ratio on your choice of wood. You can also create an interesting variation by using both in a single joint.

The guides can be used with any backless saw that has approximately 0.005" of tooth set, but work best with the Veritas dovetail saw that has been designed specifically for them. The 2" x 8-1/2" blade has 22 tpi and 0.005" of tooth set. The dozuki tooth form is effective in both crosscuts and rip cuts.

Quantity:

Dovetail Saw - £17.10
Dovetail Saw plus 1:6 (Softwood) Guide - £49.50
Dovetail Saw plus 1:8 (Hardwood) Guide - £49.50
1:6 (Softwood) Guide Only - £34.45
1:8 (Hardwood) Guide Only - £34.45

Online Catalogue > Shop by Manufacturer > Veritas > Veritas Saws and Saw Guides